[Edge Control for Industrial] Encounter issue when running 'Benchmark_Linux_3.5.15.40.project'

[Jonathan_Yeh]

Hi there,

We've completed the setup for this lab. Please refer to below information in detail. 

Now we're running this CODESYS project, and it seems to have another window pop-up to ask for project environment checkup. We would like to confirm:

   - Should we update the libraries and click 'Set All to Newest' 

   - How to download the device description ?

Thank you.

• Block Diagram

• SW

SW	Version	Check
ECI Downloaded	1.5
CODESYS	3.5.16.40
ECI BSP for ECI B	--

Item	Check
ECS-B Log In
start-cyclictest results after BIOS tuned
CODESYS reinstalled

• Run CODESYS

Regards,

Jonathan

[Jia-Shing_W_Intel · Accepted solution]

Hi Jonathan,

I don't think it's absolutely required to update the libraries but it's not a bad idea, in case CODESYS has bug fixes in them.

You can right click on the exclamation mark next to the device to download its device description.

Hope this helps.

Regards,

Jia-Shing 

[Jonathan_Yeh]

Hi Jia-Shing,

Thank you for your feedback.

Now the gateway and ECI target system can be recognized. I think we can proceed then.

Regards,

Status	Figure
Before
After

[Jia-Shing_W_Intel]

Hi Jonathan,

I'm glad things worked out for you. Thank you for correcting the title to ECI!

Thanks,

Jia-Shing

[JesusE_Intel]

If you need any additional information, please submit a new question as this thread will no longer be monitored.