Intel® Edge Software Hub
Get answers from community peers to your questions about building Edge Software Hub solutions for edge compute node.
Announcements
Welcome to the Intel Community! If you like the answer to your question, please mark it as 'Accepted Solution' to help others.

The Edge Software Vision Package for Red Hat Enterprise Linux is now available here.

Learn more about developing on Intel® Hardware and Software here.
421 Discussions

xenomai ethercat ec_generic not run

junjuns
New Contributor I
657 Views
xenomai ethercat not ec_generic.ko eci-user@eci-intel-24f9:/usr/src$ uname -a Linux eci-intel-24f9 5.15.129-intel-ese-standard-lts-dovetail+ #1 SMP PREEMPT IRQPIPE Tue Apr 16 09:42:19 UTC 2024 x86_64 x86_64 x86_64 GNU/Linux e10001e not PACKAGE_NAME="ighethercat-dkms" PACKAGE_VERSION="1.5.2" BUILD_EXCLUSIVE_KERNEL="^((5\.(1[05])\.)|(6\.1\.))" CLEAN="make -C ${kernel_source_dir} M=${dkms_tree}/ighethercat-dkms/${PACKAGE_VERSION}/build clean" BUILT_MODULE_NAME[0]="ec_master" BUILT_MODULE_LOCATION[0]="master" DEST_MODULE_LOCATION[0]="/updates/dkms" BUILT_MODULE_NAME[1]="ec_igb" BUILT_MODULE_LOCATION[1]="devices/igb" DEST_MODULE_LOCATION[1]="/updates/dkms" BUILT_MODULE_NAME[2]="ec_igc" BUILT_MODULE_LOCATION[2]="devices/igc" DEST_MODULE_LOCATION[2]="/updates/dkms" BUILT_MODULE_NAME[3]="ec_dwmac_intel" BUILT_MODULE_LOCATION[3]="devices/stmmac" DEST_MODULE_LOCATION[3]="/updates/dkms" MAKE[0]="./configure --with-devices=8 --enable-kernel --with-linux-dir=${kernel_source_dir} --disable-eoe --enable-sii-assign --enable-hrtimer --enable-cycles --enable-igb --enable-igc --enable-stmmac --enable-generic --disable-8139too --disable-r8169 --disable-e100 --disable-e1000 --disable-e1000e --disable-tool --disable-userlib && make -C ${kernel_source_dir} modules M=${dkms_tree}/ighethercat-dkms/${PACKAGE_VERSION}/build" MAKE_MATCH[1]="dovetail" MAKE[1]="./configure --with-devices=8 --enable-kernel --with-linux-dir=${kernel_source_dir} --disable-eoe --enable-sii-assign --enable-hrtimer --enable-cycles --enable-igb --enable-igc --enable-stmmac --enable-generic --disable-8139too --disable-r8169 --disable-e100 --disable-e1000 --disable-e1000e --disable-tool --disable-userlib --enable-rtdm && make -C ${kernel_source_dir} modules M=${dkms_tree}/ighethercat-dkms/${PACKAGE_VERSION}/build" AUTOINSTALL="yes"
Labels (1)
0 Kudos
4 Replies
Iffa_Intel
Moderator
622 Views

Hi,

 

In order for us to replicate this issue, could you:

  1. elaborate further your issue
  2. which ECI Ethercat guide or sample are you using

 

 

Cordially,

Iffa

0 Kudos
junjuns
New Contributor I
601 Views

eci 3.2 xenomai system 

ethercat xenomai .

ko file not ec_generic.ko

0 Kudos
Iffa_Intel
Moderator
523 Views

Hi,

 

This ECI guide/sample is specific for ECI Xenomai and EtherCAT use case: Intel® Edge Controls forIndustrial (Intel® ECI) - Motion Control on Xenomai EtherCAT*

 

It seems that your Xenomai has been correctly validated: 

Linux eci-intel-24f9 5.15.129-intel-ese-standard-lts-dovetail+

 

Perhaps you need to check and validate your EtherCAT installation and its setup.

You may refer to the guide I mentioned above for this purpose.

 

 

Cordially,

Iffa

0 Kudos
Iffa_Intel
Moderator
304 Views

Hi,


Intel will no longer monitor this thread since we have provided a solution. If you need any additional information from Intel, please submit a new question.



Cordially,

Iffa


0 Kudos
Reply