Community
cancel
Showing results for 
Search instead for 
Did you mean: 
MBeck5
Novice
1,407 Views

Compute Module + Expansion Board BIOS flash to 174 produces 0x30000 error

Jump to solution

Was able to flash 161 to a 570x Compute Module. Saw the 174 release so thought that might be a good idea.

Followed instructions:

1. Hold down DNX button.

2. Insert barrel power connector.

3. USB C already plugged into expansion board. Plug A-side into PC.

4. Release DNX button.

5. Run tool to update.

There's a pause... then out pops a 0x30000 error.

Joule still comes up with 161.

Is a list of error codes and descriptions available?

Thanks.

--Mark

0 Kudos
1 Solution
idata
Community Manager
74 Views

Hi WalkingThrough,

Thanks for your interest in the Intel Joule Platform.

I'm sorry to hear that you can't flash the most recent BIOS of the Joule. Could you be so kind to provide me the link where you download the recent firmware?

Also, could you tell me which tool you are using to update? You can also flash the BIOS manually by following this guide https://software.intel.com/en-us/flashing-the-bios-on-joule IoT - Flashing the BIOS | Intel® Software .

I will be waiting for your reply, have a nice day!

Best Regards,

 

-Jose P.

View solution in original post

3 Replies
idata
Community Manager
75 Views

Hi WalkingThrough,

Thanks for your interest in the Intel Joule Platform.

I'm sorry to hear that you can't flash the most recent BIOS of the Joule. Could you be so kind to provide me the link where you download the recent firmware?

Also, could you tell me which tool you are using to update? You can also flash the BIOS manually by following this guide https://software.intel.com/en-us/flashing-the-bios-on-joule IoT - Flashing the BIOS | Intel® Software .

I will be waiting for your reply, have a nice day!

Best Regards,

 

-Jose P.

View solution in original post

MBeck5
Novice
74 Views

OOPS.

Mea Culpa (it's my fault). Mea Maxima Culpa (it's all my fault).

I didn't wait long enough after releasing the DnX button for the Joule to 'wake up' the host computer's USB port.

Sorry about that. Joule all flashed to 174.

Mark

idata
Community Manager
74 Views

Hi Mark,

 

 

I'm glad to know that you were able to flash your BIOS! Please don't hesitate to contact us if you have any more questions.

 

 

Have a great day!

 

 

Best Regards,

 

-Jose P.
Reply