Intel® Makers
Intel® Edison, Intel® Joule™, Intel® Curie™, Intel® Galileo
Announcements
Welcome - This is a Peer-to-Peer Forum only. Intel has discontinued these products but you may find support from other customers on this Forum
9882 Discussions

Error when trying to install new packages

RSmar
Beginner
1,007 Views

Hi,

I have the latest SD card image from https://software.intel.com/en-us/iot/hardware/galileo/downloads https://software.intel.com/en-us/iot/hardware/galileo/downloads (running cat /etc/version gives 201703081404) and have added the following two files in /etc/opkg:

iotdk.conf

src iotdk-all http://iotdk.intel.com/repos/3.5/iotdk/galileo/all http://iotdk.intel.com/repos/3.5/iotdk/galileo/all

src iotdk-i586 http://iotdk.intel.com/repos/3.5/iotdk/galileo/i586 http://iotdk.intel.com/repos/3.5/iotdk/galileo/i586

src iotdk-quark http://iotdk.intel.com/repos/3.5/iotdk/galileo/quark http://iotdk.intel.com/repos/3.5/iotdk/galileo/quark

src iotdk-x86 http://iotdk.intel.com/repos/3.5/iotdk/galileo/x86 http://iotdk.intel.com/repos/3.5/iotdk/galileo/x86

mraa-upm.conf

src mraa-upm http://iotdk.intel.com/repos/3.5/intelgalactic/opkg/i586/ http://iotdk.intel.com/repos/3.5/intelgalactic/opkg/i586/

However- after opkg update when I run opkg upgrade or try to opkg install I'm getting the following error:

check_data_file_clashes: Package libc6 wants to install file /lib/libpthread.so.0

But that file is already provided by package * libpthread0

Am I missing something obvious? Sorry if it's a stupid question but I've searched through various threads on here am I'm yet to have any luck! I'm guessing I don't have the right repos and it's conflicting, could anyone point me in the right direction please? Huge thanks!

0 Kudos
1 Reply
idata
Community Manager
141 Views

Hello Richard,

 

 

Thank you for contacting Intel Technical Support.

 

I have seen this kind of issue reported by other users when trying to install a package. They have solved it by forcing the installation, you can try this command opkg install motion --force-reinstall –force-overwrite .

 

 

Hope this information helps.

 

 

Regards,

 

Octavian
Reply