Community
cancel
Showing results for 
Search instead for 
Did you mean: 
idata
Community Manager
816 Views

Intel Galileo enters on Recovery Mode but no USB activity

Jump to solution

After trying to update the my Galileo firmware with Firmware Updater 1.0.4 the board has bricked.

I trying to recover it using the FVMAIN.fv and the Recovery Mode.

I was able to enter on recovery mode and console shows "Recovery Boot Selected", but, after this, there is no more activity on console window and the USB LED on the board just blinks one time after pressing the option '4' (select galileo board) and after press 'R' (enter system recovery), also, the USB Led on the USB stick doesn't lights up.

Can some one help me to find if it's a hardware issue on the board or if I doing something wrong?

Attached are photos of the board and a screenshot of the console

Thanks in advace.

0 Kudos
1 Solution
idata
Community Manager
31 Views

Hello Ivan Athanazio,

 

 

We saw that you sent us an email with your issue. We are gonna help you with your case on email to assist in a better way, we hope to reply to you soon.

 

 

Thank you for your patience.

 

 

Regards,

 

Leonardo

View solution in original post

1 Reply
idata
Community Manager
32 Views

Hello Ivan Athanazio,

 

 

We saw that you sent us an email with your issue. We are gonna help you with your case on email to assist in a better way, we hope to reply to you soon.

 

 

Thank you for your patience.

 

 

Regards,

 

Leonardo

View solution in original post

Reply