Could you please go to /etc/opkg/ on your Edison? Once there enter cat iotkit.conf, please let us know what you get. I'm wondering if the issue could be similar to the one from this thread: /thread/95968 https://communities.intel.com/thread/95968.
My better thread: /thread/103052 https://communities.intel.com/thread/103052
Let us investigate this case a little bit more. We would like to run some tests before providing an answer. In the meantime, you could always go back to a prior image version in case you want to keep working on your code. Here's the link for image 3.0, http://iotdk.intel.com/src/3.0/edison/iot-devkit-yp-poky-edison-20160315.zip http://iotdk.intel.com/src/3.0/edison/iot-devkit-yp-poky-edison-20160315.zip.
Regarding the other thread that you mentioned. Do you have any question about that one? Tmornini already provided the link to the built image in case you haven't noticed it.
Are you still using image 3.5? If that's the case could you please try to change this line from iotkit.conf?
Original line: src iotkit http://iotdk.intel.com/repos/3.5/intelgalactic/opkg/i586/ http://iotdk.intel.com/repos/3.5/intelgalactic/opkg/i586/
Edited line: src iotkit http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586/ http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586/
The issue is that these line hasn't been updated yet, and the 3.5 intelgalactic link is not even available.
Also, which mraa and upm version are you using?
I'm also facing this problem now. But I chlick this website http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586/ http://iotdk.intel.com/repos/3.5/intelgalactic/opkg/i586/' find that the mraa 1.1.2 1586.ipk and upm upm 0.7.2 1586.ipk is avariable now(last modified: Thu, 28 Jul 2016 01:17:25 -0700).So is there any solution to this problem? and what should I do ?
hellp your reply
change line to 'src iotkit http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586/ http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586/'
- not effect.
I go back to previous image.
But... why next versions after 3.0 image haven't place (path) in http://http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586/ //iotdk.intel.com/repos/? This is not consequence.
We have already reported this and it should be solved soon. Please keep checking the link so you can update your image once that is available.
Today I executed a fresh install of the Edison firmware and The C/C++ Eclipse IDE.
I have this exact problem, "Could not detect the repository ... " I have tried to follow all of the suggestions in this post but have failed to get this working.
The post is marked assumed answered. Is the answer .. ??
We know this does not work. We will get back to you when it does?
The workaround for this issue so far is to go back to the previous image. However, I'm just checking the link that does that's causing the issue, and everything seems to be there already, http://iotdk.intel.com/repos/3.5/intelgalactic/ http://iotdk.intel.com/repos/3.5/intelgalactic/. Which image are you using now?
This is still being worked on but I'm glad to know that your code still ran fine. However, I would like to know if this is the first time you're using the Edison and the Intel System Studio.
Also, when first launching the ISS IoT Edition, did you make sure to follow the instructions according to this guide https://software.intel.com/en-us/installing-the-intel-system-studio-iot-edition https://software.intel.com/en-us/installing-the-intel-system-studio-iot-edition? Launching the iss-iot-launcher file instead of the Intel System Studio IoT Edition executable.
Yes, I followed the guide. I have been using System Studio for several months now. However, when attempting to ssh over WiFi, POSSIBLE DNS SPOOFING DETECTED, IT IS POSSIBLE THAT SOMEONE IS DOING SOMETHING NASTY, etc. showed up. This did not happen on my first Edison (I have 2), so is it possible that this Edison is corrupt, or my new network is wrong?
(Sorry, off topic)
Hi Pablo thanks for the reply
I am using 3.5 without and modifications (fresh install from the Intel site), the program I am trying to compile is the standard blink program from the eclipse examples.
After reading this thread, I also checked /intelgalactic and saw that it appeared to be complete. I also followed the suggestions in this thread.
Here is more detail on what I found.
When I first inspected iotkit.conf it was an empty file.so I manually created the iotkit.conf file. Afterward the tool chain to seem to work "the error message disappeared", but the program would not run. So I rebooted, and tried again. After the reboot the build failed again with the "Could not detect ..." message, I checked iotkit.conf and it was again empty. I surmised the problem is in the script that created iotkit.conf, but I do not know enough to confirm or correct this problem.
Just to complete the loop I used the Arduino IDE and the program compiled and ran properly.
Thanks for your attention
I have the same issue.
I've installed both the ISS IoT Edition and the latest firmware yesterday. Couldn't make it work yet.
Also have tried linking the current repository (3.5) as a custom repository, but then I couldn't run my project.
Host and target have MRAA and UPM libraries updated.
Will the previous image synchronize with the default repository of the IDE?
Edit: Yes, it will.
Irakandjii, Kelvin: could you please share a screenshot of your results when entering cat /etc/opkg/iotkit.conf, I understand from your post that you're not getting any data in there, am I right? That shouldn't be the case. I'm using the latest image as well but I didn't need to edit my iotkit.conf file.
If you're in a hurry you can always go back to the previous image, http://iotdk.intel.com/src/3.0/edison/iot-devkit-yp-poky-edison-20160315.zip http://iotdk.intel.com/src/3.0/edison/iot-devkit-yp-poky-edison-20160315.zip. This is while we try to solve this issue with the latest image.
my iotkit.conf is：
And I'm try to use the previous image, however how to install it ? use the Intel Edison Board Configuration Tool ?