Community
cancel
Showing results for 
Search instead for 
Did you mean: 
PDani3
New Contributor I
1,228 Views

Intel XDK IOT connError

Jump to solution

I am trying to connect galileo to a wifi in intel xdk iot and its giving me this error on the console: Error /net/connman/service/wifi_0cd29296cf17_4353435f484f44_managed_none: Input/output error. It's strange, I mean i have been connecting to galileo previously without problems. At other times it gives me: "Agent Report Error: wifi_0cd29296cf17_4353435f484f44_managed_none".

Somebody please help me.

Thanks.

1 Solution
Sergio_A_Intel
Employee
86 Views

Hi,

What XDK version are you using, the latest version is 2571. Can you confirm that you have configured an IP address in your Galileo? From the terminal, type ifconfig to see the IP address of wlan0. Once this is completed, connect manually using the "Add Manual Connection" option. Make sure to enter the correct User Name and Password.

If you are experiencing issues connecting to your board, connect to your board in a serial communication session and type the following:

systemctl enable xdk-daemon

systemctl restart xdk-daemon

Sergio

View solution in original post

3 Replies
ASouz7
Honored Contributor II
86 Views

PETRONG,

We have moved your thread to the forum in order for you to obtain proper answer.

Sergio_A_Intel
Employee
87 Views

Hi,

What XDK version are you using, the latest version is 2571. Can you confirm that you have configured an IP address in your Galileo? From the terminal, type ifconfig to see the IP address of wlan0. Once this is completed, connect manually using the "Add Manual Connection" option. Make sure to enter the correct User Name and Password.

If you are experiencing issues connecting to your board, connect to your board in a serial communication session and type the following:

systemctl enable xdk-daemon

systemctl restart xdk-daemon

Sergio

View solution in original post

PDani3
New Contributor I
86 Views

Thanks a lot

Reply