My Environment is Windows 10.0.15063, install FlashUsbDriver-1.0.0.exe
IF1 Version BIOS can be flashed, but 1H3 faulure. When 1H3 flashed,
what you changed in BIOS can't save.
1F1 flash log:
=========================================================
CLI version: 3.0.0.1081
Device serial:
Starting CONFIG DEVICE procedure
Device type: 0x2
Device index: 0
CONFIG DEVICE procedure failed
Error code: 0x80000036
Error message: Already configured
CLI version: 3.0.0.1081
Starting READ BOOT MEDIA procedure
Device type: 0x2
Device index: 0
Start offset: 0
Blocks to read: 0x1000
Partition index: 0x10
READ BOOT MEDIA procedure failed
Error code: 0x80000031
Error message: RPMB not provisioned
CLI version: 3.0.0.1081
Starting DOWNLOADFWOS procedure
DOWNLOADFWOS procedure success
CLI version: 3.0.0.1081
Starting CLEAR RPMB procedure
Device type: 0x2
Device index: 0
CLEAR RPMB procedure success
1H3 flash log:
=========================================================
CLI version: 3.0.0.1081
Device serial:
Starting CONFIG DEVICE procedure
Device type: 0x2
Device index: 0
CONFIG DEVICE procedure failed
Error code: 0x80000036
Error message: Already configured
CLI version: 3.0.0.1081
Starting READ BOOT MEDIA procedure
Device type: 0x2
Device index: 0
Start offset: 0
Blocks to read: 0x1000
Partition index: 0x10
READ BOOT MEDIA procedure failed
Error code: 0x80000031
Error message: RPMB not provisioned
CLI version: 3.0.0.1081
Starting DOWNLOADFWOS procedure
DOWNLOADFWOS procedure success
Link Copied
You need to flash with -clear option. This has been answered before in the forum.
You need to flash with -clear option. This has been answered before in the forum.
It's OK, thank you.
For more complete information about compiler optimizations, see our Optimization Notice.