A quick note to say that https://meshcentral.com/ Meshcentral.com now supports remote management of the https://www-ssl.intel.com/content/www/us/en/do-it-yourself/galileo-maker-quark-board.html Intel® Galileo boards. We now have a new port of the Mesh Agent that targets this board and released it on Meshcentral.com along with the installation script a few hours ago. Meshcentral makes it easy to install the mesh agent, the web site gives you an Anduino Sketch that you simply cut & paste into the Arduino development environment. That is it! A few minutes later the device will show up on Meshcentral.com and you can start managing it. We have a https://www.youtube.com/watch?v=XTtd2ZbD_Mg Youtube installation and demonstration video here.
For people that have this board already, please test it and give us feedback. I have not used the board with the MicroSD card yet and so, I have not looked into getting the Mesh agent to stay on the device across reboots. So far, the agent has been tested to works on the stock OS and development environment and suggestions as to how to improve the user experience are very welcome.
By the way, I left the Intel AMT / Intel vPro monitoring and relay code active in this port of the agent. So, if you have an Intel AMT machine nearby the is sleeping / soft-off, your Galileo board will now start monitoring it and relay traffic back to Meshcentral.com.
As a follow up, I just posted https://meshcentral.com/info/documents/MeshGalileo.pptx detailed instructions on how to setup Intel Galileo to Meshcentral.com in PowerPoint format. Should make it pretty easy for everyone.
FYI. We just updated Meshcentral.com and released a new Galileo advanced usages package. The new usages have been posted in a blog here: http://software.intel.com/en-us/blogs/2013/12/05/meshcentralcom-advanced-intelr-galileo-usages Meshcentral.com - Advanced Intel(R) Galileo Usages | Intel® Developer Zone