Intel® Makers
Intel® Edison, Intel® Joule™, Intel® Curie™, Intel® Galileo
Announcements
Welcome - This is a Peer-to-Peer Forum only. Intel has discontinued these products but you may find support from other customers on this Forum
9872 Discussions

Very slow uploading from Arduino IDE

JMart54
Beginner
1,020 Views

I have a Siemens IoT 2020, which is a device based in Galileo Gen 2 Board. I am working on Windows 7 and with Arduino IDE 1.8.2, but I have tried in others computers with windows 10.

The issue is the upload is very slow. From Arduino IDE, the upload is about 2 o 3 minutes to upload the Blink sketch.Uff!! The Sketch works right afterwards, but the upload is very slow.

I am using latest image version (109741799_Example_Image_V2.1.3), which is on Simenes website.

I am desesparate, because I have tried everything, but I did not get solve the issue.

I tested with other SD Card, with other cabling, with others PCs, but the IoT upload doesn't work. Always the same. Two minutes to upload a sketch. Uff! It is not normal.

Does somebody know what is the issue?

0 Kudos
1 Reply
FTinetti
Honored Contributor I
120 Views

J.C.M.Castillo wrote:

I have a Siemens IoT 2020, which is a device based in Galileo Gen 2 Board. I am working on Windows 7 and with Arduino IDE 1.8.2, but I have tried in others computers with windows 10.

The issue is the upload is very slow. From Arduino IDE, the upload is about 2 o 3 minutes to upload the Blink sketch.Uff!! The Sketch works right afterwards, but the upload is very slow.

I am using latest image version (109741799_Example_Image_V2.1.3), which is on Simenes website.

I am desesparate, because I have tried everything, but I did not get solve the issue.

I tested with other SD Card, with other cabling, with others PCs, but the IoT upload doesn't work. Always the same. Two minutes to upload a sketch. Uff! It is not normal.

Does somebody know what is the issue?

Hi J.C.M.Castillo,

It seems to be you are using a Siemens product, and there is a specific SIMATIC IoT 2020 forum at a Siemens site:

https://support.industry.siemens.com/tf/ww/en/threads/303/?page=0&pageSize=10 https://support.industry.siemens.com/tf/ww/en/threads/303/?page=0&pageSize=10

or

https://support.industry.siemens.com/tf/ww/en/posts/informations-about-iot2020-and-iot-2040/156413/?... https://support.industry.siemens.com/tf/ww/en/posts/informations-about-iot2020-and-iot-2040/156413/?...

I thik you should ask in that forum/follow that thread, since they are providing support for your platform.

HTH,

Fernando.

Reply