Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Beginner
1,092 Views

about edison hardware license

Jump to solution

I'm sorry to posting on Inadequate board.

I'm trying to benchmark edison board hardware part.

PCB Size, Connector part number, parts and hole array and more.

I wonder that is making issue(licensing and more) or not.

thanks.

0 Kudos

Accepted Solutions
Highlighted
Community Manager
24 Views

Hello JNLee,

 

 

Thank you for your interest in the Intel Edison Compute Board.

 

 

You can find on the below website the documentation available for Intel Edison, alongside with information about schematics and bill of materials on the board's section:

 

https://software.intel.com/en-us/iot/hardware/edison/documentation https://software.intel.com/en-us/iot/hardware/edison/documentation

 

 

Also, you can check other benchmarks that I found online, as extra resources, hoping that these can help you:

 

http://srlm.io/2015/03/02/intel-edison-benchmarks/

 

https://learn.sparkfun.com/tutorials/single-board-computer-benchmarks

 

http://www.davidhunt.ie/raspberry-pi-beaglebone-black-intel-edison-benchmarked/

 

 

Please let me know if I can help you with any more information regarding this subject or with anything else.

 

 

Thank you,

 

Eliza

 

 

View solution in original post

0 Kudos
6 Replies
Highlighted
Community Manager
25 Views

Hello JNLee,

 

 

Thank you for your interest in the Intel Edison Compute Board.

 

 

You can find on the below website the documentation available for Intel Edison, alongside with information about schematics and bill of materials on the board's section:

 

https://software.intel.com/en-us/iot/hardware/edison/documentation https://software.intel.com/en-us/iot/hardware/edison/documentation

 

 

Also, you can check other benchmarks that I found online, as extra resources, hoping that these can help you:

 

http://srlm.io/2015/03/02/intel-edison-benchmarks/

 

https://learn.sparkfun.com/tutorials/single-board-computer-benchmarks

 

http://www.davidhunt.ie/raspberry-pi-beaglebone-black-intel-edison-benchmarked/

 

 

Please let me know if I can help you with any more information regarding this subject or with anything else.

 

 

Thank you,

 

Eliza

 

 

View solution in original post

0 Kudos
Highlighted
Community Manager
24 Views

Hello JNLee,

 

 

Could you please let me know if I can help you with anything else?

 

 

Thank you,

 

Eliza
0 Kudos
Highlighted
Beginner
24 Views

Hi Eliza

thank you for reply and sorry to late reply.

I think made you confused, using word 'benchmark'.

that time I tryed to using mechanical PCB designs.

(position of connector hole and pcb size)

but in this time I'll using just connector model.

thanks

0 Kudos
Highlighted
Beginner
24 Views

Hi, Notice that Intel Edison has been discontinued. So if you want to make a PCB for a mass production you'll have to recreate the Edison module. However at this time I don't know where to find the schematics of the Edison module.

0 Kudos
Highlighted
Community Manager
24 Views

Hello Al.tair,

 

 

Since you have opened another thread (https://communities.intel.com/thread/127568 https://communities.intel.com/thread/127568) we will offer you support for this issue there.

 

 

Thank you,

 

Eliza
0 Kudos
Highlighted
Beginner
24 Views

I'm not talking about the same think, the issue your link is pointing is about a dead link refering to the Brekout Board. But Here I'm pointing that the hardware schematic of the Edison module (and not developper boards) is not published until now.

Thanks

0 Kudos