Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
New Contributor I
977 Views

intel edison compute module stuck at boot up

Jump to solution

Hi all,

I am working on a project with Intel Edison compute module with image 3.10.17-poky-edison+ . At times i see that the device is stuck on boot up at "Starting Kernel..." . Sometimes the booting hangs at *** Ready to receive application ***. We tested it with both battery and power supply.

Note: The edison is mounted on a custom made board. If you want i can give the details.

Case 1: This doesnt loop, but is simply stuck

******************************

PSH KERNEL VERSION: b0182b2b

WR: 20104000

******************************

SCU IPC: 0x800000d0 0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb 5 2015

******* PSH loader *******

PCM page cache size = 192 KB

Cache Constraint = 0 Pages

Arming IPC driver ..

Adding page store pool ..

PagestoreAddr(IMR Start Address) = 0x04899000

pageStoreSize(IMR Size) = 0x00080000

*** Ready to receive application ***

U-Boot 2014.04 (Jun 19 2015 - 12:05:55)

Watchdog enabled

DRAM: 980.6 MiB

MMC: tangier_sdhci: 0

In: serial

Out: serial

Err: serial

Hit any key to stop autoboot: 0

Target:blank

Partitioning already done...

Flashing already done...

GADGET DRIVER: usb_dnl_dfu

reading vmlinuz

5434848 bytes read in 134 ms (38.7 MiB/s)

Valid Boot Flag

Setup Size = 0x00003c00

Magic signature found

Using boot protocol version 2.0c

Linux kernel version 3.10.17-poky-edison+ (sys_dswci@tlsndgbuild004) # 1 SMP PREEMPT Fri Jun 19 12:06:40 CEST 2015

Building boot_params at 0x00090000

Loading bzImage at address 00100000 (5419488 bytes)

Magic signature found

Kernel command line: "rootwait root=PARTUUID=012b3303-34ac-284d-99b4-34e03a2335f4 rootfstype=ext4 console=ttyMFD2 earlyprintk=ttyMFD2,keep loglevel=4 g_multi.ethernet_config=rndis systemd.unit=multi-user.target hardware_id=00 g_multi.iSerialNumber=e1057655696fb2aa21ce8c1c31f88913 g_multi.dev_addr=02:00:86:f8:89:13 platform_mrfld_audio.audio_codec=wm8731"

Starting kernel ...

Case 2: This is being printed in an infinite loop

******************************

PSH KERNEL VERSION: b0182b2b

WR: 20104000

******************************

SCU IPC: 0x800000d0 0xfffce92c

PSH miaHOB version: TNG.B0.VVBD.0000000c

microkernel built 11:24:08 Feb 5 2015

******* PSH loader *******

PCM page cache size = 192 KB

Cache Constraint = 0 Pages

Arming IPC driver ..

Adding page store pool ..

PagestoreAddr(IMR Start Address) = 0x04899000

pageStoreSize(IMR Size) = 0x00080000

*** Ready to receive application ***

Please help me to resolve this issue.

regards,

Vinu

0 Kudos

Accepted Solutions
Highlighted
Community Manager
26 Views

Hello Vinu,

 

 

Thanks for reaching out!

 

 

This issue seems to be the same that you reported on https://communities.intel.com/thread/109869 https://communities.intel.com/thread/109869. I have already replied to you in there, we'll continue to help you in that thread.

 

 

-Peter.

View solution in original post

0 Kudos
1 Reply
Highlighted
Community Manager
27 Views

Hello Vinu,

 

 

Thanks for reaching out!

 

 

This issue seems to be the same that you reported on https://communities.intel.com/thread/109869 https://communities.intel.com/thread/109869. I have already replied to you in there, we'll continue to help you in that thread.

 

 

-Peter.

View solution in original post

0 Kudos