Intel® Makers
Intel® Edison, Intel® Joule™, Intel® Curie™, Intel® Galileo
Announcements
Welcome - This is a Peer-to-Peer Forum only. Intel has discontinued these products but you may find support from other customers on this Forum
9876 Discussions

pip installation on edison

sk23
New Contributor II
1,570 Views

Hi Intel Support team ,

I want to install pip and setuptools.I tried steps on below link but unable to install pip and setuptools.

http://blog.salvius.org/2015/05/installing-pip-on-intel-edison.html Installing PIP on the Intel Edison

Please help me.

0 Kudos
1 Solution
idata
Community Manager
187 Views

Hi IoT_srinivas,

 

 

I've installed pip and setuptools successfully. Please follow the instructions below:

 

 

1. Setup the Edison repo by replacing anything you have in the /etc/opkg/base-feeds.conf file with the following:

 

src/gz all http://repo.opkg.net/edison/repo/all http://repo.opkg.net/edison/repo/all src/gz edison http://repo.opkg.net/edison/repo/edison http://repo.opkg.net/edison/repo/edison src/gz core2-32 http://repo.opkg.net/edison/repo/core2-32 http://repo.opkg.net/edison/repo/core2-32

 

 

2. Setup the IoT repo by running the following commands:

 

echo "src intel-iotdk http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586 http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586" > /etc/opkg/intel-iotdk.conf

 

 

3. Run the following command: opkg update

 

 

4. Install pip by running the following commands:

 

wget https://bootstrap.pypa.io/get-pip.py https://bootstrap.pypa.io/get-pip.py --no-check-certificate

 

python get-pip.py

 

 

5. Install setuptools by running the following commands:

 

wget --no-check-certificate https://bootstrap.pypa.io/ez_setup.py https://bootstrap.pypa.io/ez_setup.py

 

python ez_setup.py --insecure

 

 

Hope this helps you.

 

 

Regards,

 

Diego

View solution in original post

2 Replies
FTinetti
Honored Contributor I
187 Views

Hi IoT_srinivas,

I think you should post this in the Edison forum, this is the Galileo one. I think both cards are very similar, though, but I think it's better if you should take advantage of the specific forum : ) )

Fernando.

idata
Community Manager
188 Views

Hi IoT_srinivas,

 

 

I've installed pip and setuptools successfully. Please follow the instructions below:

 

 

1. Setup the Edison repo by replacing anything you have in the /etc/opkg/base-feeds.conf file with the following:

 

src/gz all http://repo.opkg.net/edison/repo/all http://repo.opkg.net/edison/repo/all src/gz edison http://repo.opkg.net/edison/repo/edison http://repo.opkg.net/edison/repo/edison src/gz core2-32 http://repo.opkg.net/edison/repo/core2-32 http://repo.opkg.net/edison/repo/core2-32

 

 

2. Setup the IoT repo by running the following commands:

 

echo "src intel-iotdk http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586 http://iotdk.intel.com/repos/3.0/intelgalactic/opkg/i586" > /etc/opkg/intel-iotdk.conf

 

 

3. Run the following command: opkg update

 

 

4. Install pip by running the following commands:

 

wget https://bootstrap.pypa.io/get-pip.py https://bootstrap.pypa.io/get-pip.py --no-check-certificate

 

python get-pip.py

 

 

5. Install setuptools by running the following commands:

 

wget --no-check-certificate https://bootstrap.pypa.io/ez_setup.py https://bootstrap.pypa.io/ez_setup.py

 

python ez_setup.py --insecure

 

 

Hope this helps you.

 

 

Regards,

 

Diego
Reply