Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
222 Views

Intel® Brand Verification Tool test fail

Hello,

We do BVT test for vPro function on i7 NUC 8 element 。 the wifi function was fail , showed "The CLink interface to Wi-Fi adapter tests FAILED" in result report

 

"
Reason: All 3 of the following conditions must be satisfied but 1 failed.
Local Intel(R) AMT Functionality Tests FAILED
 
 All 25 of the following conditions must be satisfied, but 1 failed.
 
Intel(R) ME to Wi-Fi adapter interface test     FAILED
 
 SINCE     Wi-Fi adapter present     IS TRUE
Detected: Wi-Fi adapter   =   Intel(R) Wireless-AC 9560 160MHz
 
 AND     CLink interface to Wi-Fi adapter tests     FAILED
CLink interface to Wi-Fi adapter tests FAILED
 
 All 2 of the following conditions must be satisfied, but 1 failed.
Wi-Fi Manageability state (returned by Intel(R) AMT CFG_GetLanInterfaceSettings cmd)   must match   Enabled
Detected: Disabled
Detected: Wi-Fi MAC Address (returned by Intel(R) AMT CFG_GetLanInterfaceSettings cmd)   =   000000000000
"

 

 

BVT_Overall_Tests-2020_11_01__07_22 

 

0 Kudos
10 Replies
Highlighted
221 Views

Any one can help me? thanks!

0 Kudos
Highlighted
Moderator
202 Views

Hello colinzhangmadigi,


Thank you for posting on the Intel® communities.  

To better assist you, I would appreciate if you could provide the following information:


Please run the following tool and attach the reports generated.   

    

Intel® System Support Utility (Intel® SSU) Download link 

  

1.  Open the application and click on "Scan" to see the system and device information. 

2.   By default, Intel® SSU will take you to the "Summary View".   

3. Click on the menu where it says "Summary" to change to "Detailed View".   

4. To save your scan, click on "Next", then "Save".   


Additionally, I need to inform that I am unable to see the information that was attached to the case. If possible, please attach the report in a different format so we can further investigate this for you.


Esteban D.

Intel Technical Support Technician  


0 Kudos
Highlighted
198 Views

Thanks for your reply!

Now  I have get system information with SSU tool followed your step and attach "SSU_Report.txt"

Additionally, I attach BVT report "BVT_Overall_Tests-2020_11_01__07_22.zip" for your, where show wifi errror

 

 

 

0 Kudos
Highlighted
Moderator
111 Views

Hello colinzhangmadigi,


Thank you so much for your response.

Please allow me to look into this matter for you.

I will provide an update to this thread as soon as possible.


Esteban D.

Intel Technical Support Technician


0 Kudos
Highlighted
95 Views

Any updates? thanks!

0 Kudos
Highlighted
67 Views

Hello Esteban D,

Could you update this issue?

0 Kudos
Highlighted
Moderator
45 Views

Hi colinzhangmadigi,

We are still looking into this issue, I have the case escalated up to the Product Team and they are working on it.

Quick question just to better understand the whole picture: are you designing your own carrier board or would you be using an Intel one (Austin Beach/Butler Beach)?

 

Regards,

Ronny G

0 Kudos
Highlighted
43 Views

Dear,

We tested with our own designed carrier board, not intel's 

0 Kudos
Highlighted
Moderator
25 Views

Hi colinzhangmadigi,

 

We would prefer to handle product designing related issues via a different support venue.

I sent you an email asking for additional information that I need before I submit this issue to our Product Team.

 

Thanks,

Ronny G  

0 Kudos
Highlighted
18 Views

Dear,

I have reply your mail

0 Kudos