After windows update, when turning on PC error show's up: "Detected BIOS Security Jumper removed" on nuc8i7hvk
This is weird coz the problem happens randomly and sometimes im lucky it boots to windows normally.
What's not screen:
Detected BIOS Security Jumper removed
 Suppress this menu until the BIOS Security Jumper is replaced
 Clear BIOS User and Supervisor Passwords
 Clear Trusted Platform Module
[F2] Intel Visual BIOS
[F4] BIOS Recovery
None of option solves the problem, only after a couple resets i can luckily boot to windows so now i have to stay 24/7 on. I need help... What causes the problem and how to solve it? I there way to do it without opening the chase and do something with bumper? Im really not into that kind of stuff im afraid i will break something inside.. :(
- You are seeing the Configuration Menu (like this one on the attached image). This menu appears if the BIOS Security Jumper is removed (or not firmly sitting on its pins) and NUC is powered ON. The NORMAL position where the jumper should be installed is between pins 1-2. Please refer to Technical Product Specification, page 46
- There is no possibility to check the jumper and reinstall it correctly, without opening the upper NUC cover. This video show how to do this.
UPDATE: I just did that: Check manual, turn off, open up, find bios jumper and... it was like it should be on position 1-2. Turn on computer and error does not show up anymore - can't reproduce error. Does that means by motherboard is damaged or something? I hate when something with hardware happens randomly..
Well, I would at least remove and then reinsert the jumper. If it feels like it isn't solid on the posts, then the jumper will need to be replaced.