Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Beginner
918 Views

NUC8I7BEH で電源を入れると再起動を繰り返す

Jump to solution

NUC8I7BEH で電源を入れると、再起動を繰り返します。

詳しい現象は、、、、

・Intel NUC という BOISが表示する起動画面が出ない

​・電源のLEDランプが点灯して、しばらくすると(5秒程度?)、ランプが消灯し(10秒程度?)、再び、電源がオン(LEDランプが点灯)し、

これを無限ループする

BOISが壊れているのかとも思うのですが、回復ファイルも USBメモリから読み込まずに再起動を繰り返していて、困っています。​

0 Kudos

Accepted Solutions
Highlighted
Super User
92 Views

Please recover your bios, using Bios recovery method with the security jumper removed: https://www.intel.com/content/www/us/en/support/articles/000005532/mini-pcs.html

1.Prepare USB stick fully formatted to FAT32 with Bios file BE0056.bio Download BIOS Update https://downloadcenter.intel.com/download/28394/BIOS-Update-BECFL357-86A-?product=126140 . Format your USB with Quick Format option unchecked. Do not format your USB in MAC (OS) or Linux machine. Use Windows.

2. Disconnect the power adapter and remove the bottom cover from your NUC.

3. Remove the yellow security jumper.

4. Insert the USB with the BE0056.bio file.

5. Reconnect the power adapter and power ON the NUC. Wait 30 sec - 2min. The Recovery process will start automatically and will end after 2 -5 minutes.

6. When bios recovery completed, switch the power OFF, remove the power adapter and replace the Security Jumper (pins 1-2)

7. Power your NUC ON.

 

Hope this helps

Leon

 

View solution in original post

1 Reply
Highlighted
Super User
93 Views

Please recover your bios, using Bios recovery method with the security jumper removed: https://www.intel.com/content/www/us/en/support/articles/000005532/mini-pcs.html

1.Prepare USB stick fully formatted to FAT32 with Bios file BE0056.bio Download BIOS Update https://downloadcenter.intel.com/download/28394/BIOS-Update-BECFL357-86A-?product=126140 . Format your USB with Quick Format option unchecked. Do not format your USB in MAC (OS) or Linux machine. Use Windows.

2. Disconnect the power adapter and remove the bottom cover from your NUC.

3. Remove the yellow security jumper.

4. Insert the USB with the BE0056.bio file.

5. Reconnect the power adapter and power ON the NUC. Wait 30 sec - 2min. The Recovery process will start automatically and will end after 2 -5 minutes.

6. When bios recovery completed, switch the power OFF, remove the power adapter and replace the Security Jumper (pins 1-2)

7. Power your NUC ON.

 

Hope this helps

Leon

 

View solution in original post