Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
16729 Discussions

FPGA Design Transfer to PCB

Altera_Forum
Honored Contributor II
1,451 Views

Sir, 

 

I would like somebody to guide me that i am using Altera Stratix EP1S80B956C6 development kit for my design. i have finalised the stuff. now need to transfer the code to an eeprom and develop a standalone PCB for the purpose. do we have an option of programming kits with eeproms pluged in on some base so that we can program them and solder them to PCBs for further distribution.  

 

THX
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
726 Views

There is a good overview of configuration for Stratix devices here: 

 

http://www.altera.com/literature/hb/stx/ch_13_vol_2.pdf 

 

Take a look at the literature section of the Stratix product page on the Altera website and you can find a lot of useful whitepapers and app notes for transfering your design to a PCB. 

 

There is a lot to take care of, so I don't think anyone can just guide you through it. Luckily there is plenty of good literature available from Altera. 

 

Regards, 

 

Tyler
0 Kudos
Reply