Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
16877 Discussions

I have Quartus II 13.0.1 web edition? When I try to simulate using University Program WMF the end time is limited to 100us. How can extend it? I saw in tutorials that it is not limited.

CZET
Beginner
3,428 Views
0 Kudos
8 Replies
Vicky1
Employee
2,470 Views

Hi,

Can you please check with the option Edit->Set End Time.. ?

Refer the below link for the reference,

https://www.youtube.com/watch?v=a8JAkKhxlQI

 

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

 

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)

 

0 Kudos
CZET
Beginner
2,470 Views

Yes, I know this. First, the time units are only ns and us. It is a dropdown menu, When I try to put more than 100us, it says "Invalid entry. Please enter a value between 10ns and 100us."

Cristian

0 Kudos
Vicky1
Employee
2,470 Views

Hi Cristian,

I also realize same behavior.

Can you help me to confirm that these features are available in University Program Installer (Windows) for Quartus 13.0 from the link below,

https://www.intel.com/content/www/us/en/programmable/support/training/university/materials-software.html?&ifup_version=13.0

 

you may refer the'End Time' in below links,

ftp://ftp.intel.com/Pub/fpgaup/pub/Intel_Material/15.1/Tutorials/VHDL/Quartus_II_Simulation.pdf

https://www.intel.co.jp/content/dam/altera-www/global/ja_JP/pdfs/literature/hb/qts/qts_qii53017.pdf

 

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

 

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)

0 Kudos
CZET
Beginner
2,470 Views

Yes, as you can see in the attachment, I have the web edition which I installed using the following installer: QuartusSetupWeb-13.0.1.232.exe. It does limit me for the end time.

I need longer time to simulate because I teach project class and They design frequency-meters, period-meters, chronometers or digital watches, where they have to simulate more than 10 s sometimes.

I will try to install the version youindicated in the first link, to see what happens.

Thank you!

Cristian

0 Kudos
CZET
Beginner
2,470 Views

Now I noticed the link for patch. I didn't install any patches. I will try it too.

0 Kudos
CZET
Beginner
2,470 Views

I installed, in the mean time, the version in your first link (https://www.intel.com/content/www/us/en/programmable/support/training/university/materials-software.html?&ifup_version=13.0), I added the patch. Still the same problem: the end time is limited to 100us.

0 Kudos
Vicky1
Employee
2,470 Views

Hi Cristian,

Can you please check with Quartus 9.1?

Please find the attachment,

https://www.intel.co.jp/content/dam/altera-www/global/ja_JP/pdfs/literature/hb/qts/qts_qii53017.pdf

End_time_Q9.1.JPG

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)

 

 

0 Kudos
CZET
Beginner
2,470 Views

Hello,

OK, I will try as soon I will get some time. The idea was to work with Cyclone II EP2C5T144 available on a cheap development board on the market. I teach project classes and I wish that the students could buy such board and physically develop the project. Does Quartus 9.1 support this circuit?

Cristian

0 Kudos
Reply