Hello My name Ercherio... I am a Electrical Engineering from ITDEL (Indonesia). I want to do project about Face Detection and Counting using FPGA. I need your suggest,"what is methode and material or type of FPGA and Camera to prepare to do this project?"
Thanks for contacting us.
Basically there is a wide range of FPGA development kits to do such a project.
My preferred dev kit is DE10 Nano SoC. This is a Cyclone V soc device with Arm SoC.
For the camera, this module you need to search about since we dont have camera modules. However, you might start with this:
Hope this might help.
Nios II is a soft-core processor IP available in all FPGA devices. DE-10 Nano is a cyclone V SoC based board. You can create your Nios II application on this FPGA.
You can refer to these links:
Hope this might be helping.
Power etc sould be in the datasheet for the module. Advantages are difficult to say. It depends on your specific application. What are the conditions: low light, distance to object, required framerates etc.
TRDB_D5M camera is used widely with Terasic boards. You can refer to the user guide of this module:
If you need more information about it, you can ask Terasic.