Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
16910 Discussions

It was failed Upgrade IP Components in Quartus Prime Lite Edition. Do you have any idea?

Hiro
Novice
2,515 Views

Please tell me It was failed Upgrade IP Components in Quartus Prime Lite Edition. Do you have any idea?

I was opened by Quartus Prime that Quartus Ⅱproject file.Then IP Component of ALTPLL can't upgrate .
First design used to use Cyclone Ⅳ E(EP4CE6E22C8N) and Quartus II Web Edition Version 12.1,But now use Cyclone 10 LP(10CL010YE144I7G) and Quartus Prime Lite Edition.
Do you have any aidea of IP Component of ATPLL fit to Quartus Prime Lite Edition.
Please tell me.
Thank you for reading.

0 Kudos
1 Solution
sstrell
Honored Contributor III
2,507 Views

The old ALTPLL IP isn't available in Cyclone 10, preventing an easy upgrade, so you would have to replace it.  Here's the user guide for the PLL you should be using now:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_altera_iopll.pdf

#iwork4intel

View solution in original post

1 Reply
sstrell
Honored Contributor III
2,508 Views

The old ALTPLL IP isn't available in Cyclone 10, preventing an easy upgrade, so you would have to replace it.  Here's the user guide for the PLL you should be using now:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_altera_iopll.pdf

#iwork4intel

Reply