Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)
16737 Discussions

Problem compiling Matrix Mult example

Altera_Forum
Honored Contributor II
2,248 Views

When compiling the matrixmult example, I get this message below but with no indication as where the errors are! 

 

 

Info (21057): Implemented 96131 device resources after synthesis - the final resource count might be different 

Info (21058): Implemented 2049 input pins 

Info (21059): Implemented 1713 output pins 

Info (21060): Implemented 180 bidirectional pins 

Info (21061): Implemented 77380 logic cells 

Info (21064): Implemented 11389 RAM segments 

Info (21065): Implemented 17 PLLs 

Info (21066): Implemented 2 delay-locked loops 

Info: Quartus II 64-Bit Analysis & Synthesis was successful. 0 errors, 162 warnings 

Info: Peak virtual memory: 6531 megabytes 

Info: Processing ended: Fri Jun 28 19:10:09 2013 

Info: Elapsed time: 00:15:44 

Info: Total CPU time (on all processors): 00:07:36 

Error (281039): Finished parallel synthesis of 1 partition(s). 1 partitions did not finish parallel synthesis because there were errors 

Error (281040): Partition "Top" did not complete synthesis due to errors 

Info (144001): Generated suppressed messages file /work/altera/designs/matrixMult/matrixMult_pcie385n_d5/matrixMult/top.map.smsg 

Error: Quartus II 64-Bit Analysis & Synthesis was unsuccessful. 2 errors, 56368 warnings 

Error: Peak virtual memory: 19916 megabytes 

Error: Processing ended: Fri Jun 28 19:31:18 2013 

Error: Elapsed time: 06:02:40 

Error: Total CPU time (on all processors): 01:56:21
0 Kudos
6 Replies
Altera_Forum
Honored Contributor II
978 Views

The actual error is probably further up in the log file. Is there at least 16GB of RAM installed in the machine that was compiling the design?

0 Kudos
Altera_Forum
Honored Contributor II
978 Views

The machine does have 16GB of RAM. I've checked the log file and there is no mention of any errors at all until the 

 

Error (281039): Finished parallel synthesis of 1 partition(s). 1 partitions did not finish parallel synthesis because there were errors 

Error (281040): Partition "Top" did not complete synthesis due to errors
0 Kudos
Altera_Forum
Honored Contributor II
978 Views

I recommend opening a service request and having the support team at Altera take a look at the log file to see what is causing the issue: http://www.altera.com/mysupport 

 

Also in the top level of the matrix multiplication directory is a readme file that explains how the prebuild .aocx files were generated. Did you use the same instructions or did you just call aoc without any flags?
0 Kudos
Altera_Forum
Honored Contributor II
978 Views

I called aoc without any flags. I am rerunning now with the flags suggested in the README.txt 

 

It would be frustrating if that turns out to be the root cause......
0 Kudos
Altera_Forum
Honored Contributor II
978 Views

Using the flags in the README.txt seems to have fixed this. 

 

Thanks.
0 Kudos
SPere43
Beginner
978 Views

Hello guys,

I have the same error.

What's flags you update? I dont see anything, someone can help me?

0 Kudos
Reply