Quartus 5 project for Altera FLEX 6010A

[BrianMcFadden]

Hi,

I'm currently working on a project to upgrade an Altera FLEX 6010A CPLD to something more modern. The old project uses a 10BASE2 interface with BNC connectors, and we'd like to upgrade it to Ethernet, and at the same time move to a new FPGA. The previous project is written in AHDL, and we'd also like to port that design to VHDL.

The design was developed with Quartus 5.0. Quartus support for FLEX 6010 ended with Quartus 9.0, and it's not possible to get anything earlier than Quartus 13.0.1 off of the Intel FPGA Software Download Center. I'd like to verify the design, and I'd appreciate using Quartus to make sure the old project files were complete and synthesizable, and take a look at the RTL viewer, and maybe other tasks.

Is it possible to obtain Quartus 5.0 from Intel? If not 5.0, then 9.0? If it is possible, who would I need to contact to make this happen?

Thanks,

-Brian

[RichardTanSY_Intel · Accepted solution]

Hi @BrianMcFadden 

Unfortunately, we are not able to share the old Quartus software as this product has been discontinued. 

Please contact your Intel sales representative or distributors to request access to the discontinued software.

If your request is approved, you will receive a link via email to download the software.

https://marketplace.intel.com/s/pmp-partner-program/a723b0000008PICAA2/distributor?language=en_US&search=%257B%2522p%2522%253A1%252C%2522f%2522%253A%257B%2522DistributorComponents%2522%253A%255B%2522Field%2520Programmable%2520Gate%2520Array%2522%255D%257D%257D

Best Regards,
Richard Tan

p/s: If any answer from the community or Intel support are helpful, please feel free to give Kudos. 

[BrianMcFadden]

Thanks!