Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)

UFM page address

m_kumar
New Contributor I
992 Views

Hi .

I'm using max10 FPGA in user flash memory in my project . It has 4 pages in one sector each page is 64kbits of size. Now how to identify what is starting and ending address of each page in memory to write or read data from flash memory.

0 Kudos
12 Replies
JohnT_Intel
Employee
984 Views

Hi,


You will need to calculate the starting address and ending address of each page based on the starting address of that sector.


m_kumar
New Contributor I
982 Views

My project  i have 3 sector id and starting address of. (max10m40 fpga)

Sector id 1 starting address =  0x0000; and ending address was 0x7fff;

each page of 64kbits what is the ending address of first page and how to calculate.

 

0 Kudos
JohnT_Intel
Employee
980 Views

Hi,


Each address will contain 32bit data. So the end address should be 0x800.


m_kumar
New Contributor I
978 Views

so you did 65536/32 = 0x800 right?

 

0 Kudos
JohnT_Intel
Employee
977 Views

Hi,


Yes. If you using Qsys with Nios then it will be using 8bit addressing. So you need to divide by 8 only which will be 0x2000.


0 Kudos
m_kumar
New Contributor I
974 Views
0 Kudos
m_kumar
New Contributor I
973 Views

This is my configuration sir.

Each address is storing 32 bit data.

 

0 Kudos
JohnT_Intel
Employee
971 Views

The picture you are showing will be based on 8bit addressing. So I would recommend you to divide by 8.


m_kumar
New Contributor I
967 Views
0 Kudos
JohnT_Intel
Employee
962 Views

Let me know if you have any other queries


m_kumar
New Contributor I
960 Views
0 Kudos
m_kumar
New Contributor I
937 Views

Sir in IP one option is there i,e: Flash initialization option is there in that user created mif file or hex file options indicates what sir.

 

0 Kudos
Reply