I inherited a quartus design for the first time and am trying to resolve a number of timing violations.
The timing report is flagging a hold time violations in red but I'm not comprehending what exactly its telling me. Specifically the "Hold Summary" report under "Timing Analyzer".
I expect timing violations to have source clock/signal and destination clock/signal but this report only has a single column for "clock".
So what am I looking at and what am I missing?
Hopefully this helps:
Timing Analyzer Quick-Start Tutorial: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_tq_tutorial.pdf
Intel® Quartus® Prime Timing Analyzer Cookbook: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/manual/mnl_timequest_cookbo...
Introduction to Timing Analyzer(Pro Edition): https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-qpp-timing-analyzer.p...
Introduction to Timing Analyzer(Standard Edition): https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-qps-timing-analyzer.p...