elektor kenski 22 hours ago I created the project for the d flip flop in the Elektor article. Why d

[KenCiszewski]

kenski 22 hours ago

I created the project for the d flip flop in the Elektor article FPGAs for Beginners by Theo Mulder (the March April 2024 issue) which uses Quartus Lite.

Why do the symbols that I see on the screen look scrunched up, the text/labels look like they are partially obscured, not as clear as what is in the manual?

I also did the example in the Arrow manual for the CYC1000 board, it doesn't look good either, certainly not as clear what is in the manual.

[RichardTanSY_Intel]

This is most likely caused by the text size scaling setting in your machine.

You may checkout the workaround here:

https://media.oregonstate.edu/media/t/1_uxtulqg5

Further info: https://www.majorgeeks.com/content/page/how_to_change_dpi_scaling_settings_in_windows.html#:~:text=DPI%20stands%20for%20dots%20per,no%20DPI%20awareness%20at%20all.

Regards,

Richard Tan

[RichardTanSY_Intel]

Do you able to resolve your issue?

Regards,

Richard Tan

[KenCiszewski]

I haven't had a chance to work on it yet.

[KenCiszewski]

I did what the video suggested, that fixed the problem.

Thanks!

[RichardTanSY_Intel]

I'm pleased to know that your issue has been addressed. 

Now, I will transition this thread to community support. If you have any further questions or concerns, please don't hesitate to reach out.

Thank you and have a great day!

Best Regards,

Richard Tan

p/s: If you find any answers from the community or Intel Support to be helpful, we encourage you to mark them as the best answer or rate them 4/5 in the survey.