Intel® Quartus® Prime Software
Intel® Quartus® Prime Design Software, Design Entry, Synthesis, Simulation, Verification, Timing Analysis, System Design (Platform Designer, formerly Qsys)

.jic File Creation

GLees
New Contributor II
398 Views

I'm using an EP4CE30 device and Quartus Prime Lite version 21.1.0.  When I try to create a .jic programming file the "Configuration Device" selection shows only EPCQL1024.  There are no other choices available.  I'm using an EPCQ64A configuration device.

If I create my .jic file using the EPCQL1024 as my configuration device, my board fails when trying to program it.

0 Kudos
1 Solution
YuanLi_S_Intel
Employee
378 Views

Hi, can you click the ... button beside it? You can select the other configuration device in that option. If the configuration device is not available, you need to create it with the setting. You may refer to link below for the option usage:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-qpp-gen-flash-programmer.pdf#page=15


View solution in original post

0 Kudos
1 Reply
YuanLi_S_Intel
Employee
379 Views

Hi, can you click the ... button beside it? You can select the other configuration device in that option. If the configuration device is not available, you need to create it with the setting. You may refer to link below for the option usage:

https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug-qpp-gen-flash-programmer.pdf#page=15


0 Kudos
Reply