"quartus_cdb --update_mif" in Quartus Prime

[KYosh10]

I could not find "--update_mif" option in the following User Guide.

(https://www.intel.com/content/www/us/en/programmable/products/design-software/fpga-design/quartus-pr...)

Is this option still available in the current version?

[Vicky1]

Hi,

Refer the "Update Memory Contents Without Recompiling" from attached "Intel Quartus Prime Standard Edition Handbook Volume 1".

Also refer link for the Quartus Prime Pro edition,

https://www.intel.com/content/altera-www/global/en_us/index/support/support-resources/knowledge-base...

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)

[KYosh10]

Hi,

Although the version of the attached handbook is old (17.1 or 16.1), is the "- update_mif" option available also in the latest Quartus Prime?

Best Regards

[Vicky1]

Hi,

Yes, It is available in latest versions also.

Refer the latest Scripting user guide for  "Update Memory Contents Without Recompiling",

https://www.intel.com/content/www/us/en/programmable/documentation/jeb1529967983176.html

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)