- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
Sir/Madam,
what is the PCI device with VID/PID pair of PCI_DEVICE( PCI_VENDOR_ID_INTEL, 0x201d ) ?
The VID/PID pair shows in Intel's vmd.c as follows:
-------------------------------------------------------------------------------
...
static const struct pci_device_id vmd_ids[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x201d),},
{0,}
};
....
-------------------------------------------------------------------------------
Sincerely,
Liu Wang
Enlace copiado
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
liuw: Thank you very much for contacting the Intel® communities. We will do our best to provide the information you are looking for.
In order to deliver the most accurate response, we just wanted to confirm a few details about your platform:
What is the model of the motherboard?
What is the model of the processor?
If this is a laptop, what is the model of the laptop?
Which operating system is installed on the computer?
Any further questions, please let me know.
Regards,
Alberto R
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
Alberto,
Thanks your kind reply.
It is a Super micro X11DPU mother board with Intel® Xeon® Scalable Processors., Dual Socket P (LGA 3647) and will be installed with Suse OS.
Sincerely,
Liu Wang
- Marcar como nuevo
- Favorito
- Suscribir
- Silenciar
- Suscribirse a un feed RSS
- Resaltar
- Imprimir
- Informe de contenido inapropiado
liuw: You are very welcome. Thank you very much for providing that information. In this case, in order to get the information you are looking for, you just need to get in contact directly with Supermicro and they will be able to further assist you with this subject:
https://www.supermicro.com/support/contact.cfm https://www.supermicro.com/support/contact.cfm
Any questions, please let me know.
Regards,
Alberto R
- Suscribirse a un feed RSS
- Marcar tema como nuevo
- Marcar tema como leído
- Flotar este Tema para el usuario actual
- Favorito
- Suscribir
- Página de impresión sencilla