PT_STATUS_INVALID_PT_MODE: Command is not permitted in current operating mode.

[idata]

Hi,

I've set up Intel AMT SCS and now I'm trying to connect one machine to it, but when I run the Activator utility I'm getting such an output:

>activator /s https://server.somedomain.net/amtscs_rcfg /o OU=IntelAMT,DC=somedomain,DC=net /p 7 /c /h

Step Into: CheckAMT

Connected to HECI driver, version: 3.0.30.1086

BIOS Version: 786F1 v01.04

Intel AMT code versions:

Flash: 3.0.1

Netstack: 3.0.1

AMTApps: 3.0.1

AMT: 3.0.1

Sku: 14

VendorID: 8086

Build Number: 1104

Recovery Version: 3.0.1

Recovery Build Num: 1104

Legacy Mode: False

Setup and Configuration:

In process

Setup and Configuration TLS Mode:

PSK

Step Into: CheckPKIPPSPIDStatus

Connected to HECI driver, version: 3.0.30.1086

Step out: CheckPKIPPSPIDStatus error 0

Step Into: CSCSER::PerformSCSRemoteConfiguration

Step Into: CSCSER::SCSSetAMTIdentity

AMT version: 3.0 Step Into: StartConfiguration

BIOS Version: 786F1 v01.04

Intel AMT code versions:

Flash: 3.0.1

Netstack: 3.0.1

AMTApps: 3.0.1

AMT: 3.0.1

Sku: 14

VendorID: 8086

Build Number: 1104

Recovery Version: 3.0.1

Recovery Build Num: 1104

Legacy Mode: False

Setup and Configuration:

In process

Intel AMT Mode:

Non Legacy

Remote Configuration:

enabled

Setup and Configuration TLS Mode:

PSK

PT_STATUS_INVALID_PT_MODE: Command is not permitted in current operating mode.

Activate Intel AMT configuration:

failure

PT_STATUS_INVALID_PT_MODE: Command is not permitted in current operating mode.Step Into: StartConfiguration

Step out: StartConfiguration error 3

After StartConfiguration 3

Retrieved PID from the machine. Pid is 35HM3WFT

Connect to gandalf.delfopl.magnetto.net: at port: 9971:Sent hello message successfully!

Connect to gandalf.delfopl.magnetto.net: at port: 9971:Sent hello message successfully!

Connect to gandalf.delfopl.magnetto.net: at port: 9971:Sent hello message successfully!

Exit with code 0

All operations succeeded; interface opened.

and at SCS console the station connects to right profile (id 7) but is in "not configured" status.

Any suggestions?

PS. Sorry for my English, I'm still learning