NUC5i5MYBE CUSTOM BIOS ANOMALY

[T100G30]

We have created a custom bios using the Intel Toolkit Integrator with specific bios settings and a custom logo for the NUC5i5MYBE board. The custom bios was created on a board with the latest BIOS. When we attempt the update a board with a BIOS from 2015, we have to flash it a few times. The flash will update the BIOS from 2015 to the latest version, but the BIOS custom settings do not get updated. After flashing a second time, will the BIOS setting get updated, but the custom logo is still the default Intel logo. The third flash will update the logo. Has anyone experienced this before? We following the instructions in the PDF from the toolkit and when performing this on other NUC that we have (NUC5i5RYK, NUC7i5DNB / DNKE), we only have to flash it once for all the settings to take.

Thanks in advance.

[AdrianM_Intel]

Hello T100G30,

Thank you for posting on the Intel® communities.

The interactive technical support for Intel® NUC Board NUC5i5MYBE has been discontinued. We are moving this thread to the Discontinued Products forum for peer-to-peer support. 

https://forums.intel.com/s/topic/0TO0P000000PmraWAC/discontinued-products?language=en_US  

Best regards,

Adrian M.

Intel Customer Support Technician