10M02SCE144I7G - 144EQFP package showing two options

[JPUTT1]

Hi,

10M02SCE144I7G - 144 EQFP package we are using in our design. in the package drawing shows option -1 and option -2 looks the dimensions are same but the only difference observed between two options Ejector Pin Mark and Gate Pin Mark location which are there on IC. attached referred drawing for your reference. Please clarify following questions.

• what is use of those marking circles??
• is these marking effects on ordering part number??

Thanks & Regards,

jagadish.

[Vicky1]

Hi Jagadish,

You may refer to PCN1502 to understand further on this change.

https://www.intel.de/content/dam/www/programmable/us/en/pdfs/literature/pcn/pcn1502.pdf

In order to purchase the FPGA, users are recommended to refer to the link below by clicking on the product and search for ‘How to Buy’

https://www.intel.com/content/www/us/en/products/programmable.html

Let me know if this has helped resolve the issue you are facing or if you need any further assistance.

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)

[Vicky1]

Hi Jagadish,

Is this helped to resolve the issue you are facing or you need any further assistance?

Best Regards

Vikas Jathar 

(This message was posted on behalf of Intel Corporation)