- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
A couple of weeks ago I started to get familiar with Max 10 and Nios II.
I am very new to all this. I am aware of the fact that I need to study and learn the basics, but one good example will be very helpful.
Currently I did a lot of searching on the web on how to start with fpga's. Tried many examples, but non of them works.
Thanks to the help of many people, I managed to get further and further on getting started with Max 10 and Quartus.
Referring to my posts here:
Home>FPGA Developers>FPGA, SoC, And CPLD Boards And Kits
'How to get Quartus (19.1) and the simulator running'
and
Home>FPGA Developers>FPGA Embedded Systems>Nios® II Embedded Design Suite (EDS)
'No templates available after inserting SPOC info file'
But now I am facing a new problem:
Using cable "USB-Blaster [USB-0]", device 1, instance 0x00
Pausing target processor: not responding.
Resetting and trying again: FAILED
Leaving target processor paused>
Searching the web, brings me: 'bad fpga design', 'timing issues', etc.
But this is all above my head.
I was wondering: is there an example that actually works? I am a bit frustrated that it has to take weeks to get a simple example running.
The 'out of the box' feeling is not so good here.
And yes, I am aware that I have to study more of Max and Nios II, but a simple working example would be very helpful.
I am using:
- Windows 10 Ent. 64 bit with WSL
- Quartus 19.1 lite
- Max 10 DE10-Lite demo board
- Eclipse Mars.2
I hope someone can help me.
Sorry for cross posting the same topic/problem here.
Link Copied
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page