GPIO access using Qsys tool and Linux in deo nano

Nios® V/II Embedded Design Suite (EDS)

Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++

GPIO access using Qsys tool and Linux in deo nano

1,084 Views

Hi ,

I have selected the required GPIO_0 and GPIO_1 from qysys periperal pins and generated the VHDL for this.after this I have added top level file to access these GPIO's.In the Assignment editor GPIO_0 and GPIO_1 is reflecting with Bank 7 pins.

Is this assignment correct??..After creating the .SOF when I flashed to Deo nano ..only GPIO 53 is being accessed from Linux space.Other pins cannot be accessed.Even after when we try to bind we get error saying -sh: echo: write error: No such device

Need to know actual GPIO_1_D1 is different pin and GPIO29 is different pin..what needs to be changed in .V file to access the pin in linux??

Is this a linux issue or the .SOF issue??If I am able to access pin53 why I cannot access others????

Kindly help us to go through this forum

--Thanks in advance

Ravi

Link Copied

0 Replies

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.