Community
cancel
Showing results for 
Search instead for 
Did you mean: 
Highlighted
Valued Contributor III
691 Views

Help to install uClinux on Cyclone 3

Please help me, i have some problems compling the nios2 toolchainI want to install uClinux (2.6.9) on Cyclone 3 EP3C25F324C8, following the tutorial "http://scorpius.homelinux.org/~marc/nios2.html". When i arrive at the command "make ARCH=nios2nommu CROSS_COMPILE=nios2-linux-uclibc- hwselect SYSPTF=/home/nastri/nios/sopc.ptf" for the kernel configuration, there would be a list of hardware resources of my Nios system, but the list is empty (under "Please select a device to upload the kernel to:"). In the following it can be observed the problem in the Linux (Debian) shell.

0 Kudos
2 Replies
Highlighted
Valued Contributor III
3 Views

Message unreadable

0 Kudos
Highlighted
Valued Contributor III
3 Views

Pratically: 

nastri@debian:~$ su 

Password: 

root@debian:/home/nastri# export PATH=$PATH:/opt/nios2/bin 

root@debian:/home/nastri# cd linux-2.6.9 

root@debian:/home/nastri/linux-2.6.9# make ARCH=nios2nommu CROSS_COMPILE=nios2-linux-uclibc- hwselect SYSPTF=/home/nastri/nios/sopc.ptf 

no emulation specific options. 

RUNNING hwselect 

--- Please select which CPU you wish to build the kernel against: 

(1) cpu - Class: altera_nios2 Type: s Version: 7.08120 

Selection: 1 

--- Please select a device to upload the kernel to: 

Selection: (but there aren't options to choose)" 

Regards
0 Kudos