Community
cancel
Showing results for 
Search instead for 
Did you mean: 
TAhme12
Beginner
404 Views

How can you measure values from several ADC channels on a DE1 SoC?

Hi,

 

By following the DE1_SoC_ADC example of the DE1 revF CD, I can collect measurements from a single ADC channel. I have connected a pulse rate sensor to the ADC and am using a timer interrupt on the NIOS II processor to take measurements from the ADC as 2ms interval. However, when I want to measure a different channel, I am unable to receive and data from it?

 

Any help would be appreciated.

 

 

 

int ch[2]; int main(){   printf("Pulse Rate Demo\r\n");   // register the timer irq to be serviced by handle_timer_interrupt() function alt_irq_register(TIMER_IRQ, 0, handle_timer_interrupt); // activate the time IOWR_ALTERA_AVALON_TIMER_CONTROL(TIMER_BASE, ALTERA_AVALON_TIMER_CONTROL_CONT_MSK | ALTERA_AVALON_TIMER_CONTROL_START_MSK | ALTERA_AVALON_TIMER_CONTROL_ITO_MSK);   while(1){ ch[0] = IORD(SW_BASE, 0x00) & 0x07;   ch[1] = IORD(SW_BASE, 0x4) & 0x07;   // set measure number for ADC convert IOWR(ADC_LTC2308_BASE, 0x01, nReadNum);   //printf("%d,%d,%d,%d, %d,%d\n",thresh,T,P,N,adcVal,BPM-1); printf("ch:%d, i:%d, BPM:%d\n",ch[i],i,BPM); usleep(200*1000); } }     void handle_timer_interrupt(void*p, alt_u32 param) { // clear irq status in order to prevent retriggering IOWR_ALTERA_AVALON_TIMER_STATUS(TIMER_BASE, 0); // your isr code here   i=!i;     if(i==1){ // start measure IOWR(ADC_LTC2308_BASE, 0x00, (ch[0] << 1) | 0x00); IOWR(ADC_LTC2308_BASE, 0x00, (ch[0] << 1) | 0x01); IOWR(ADC_LTC2308_BASE, 0x00, (ch[0] << 1) | 0x00); i=0; } else { IOWR(ADC_LTC2308_BASE, 0x00, (ch[1] << 1) | 0x00); IOWR(ADC_LTC2308_BASE, 0x00, (ch[1] << 1) | 0x01); IOWR(ADC_LTC2308_BASE, 0x00, (ch[1] << 1) | 0x00); }   // wait measure done while ((IORD(ADC_LTC2308_BASE,0x00) & 0x01) == 0x00);   Value = IORD(ADC_LTC2308_BASE, 0x01);   adcVal = ((float)(Value/1000.0)/5)*1024; .............................................

 

0 Kudos
1 Reply
Rahul_S_Intel1
Employee
39 Views

May I have the project file for reference
Reply