Max 10 'Downloading ELF Process failed' (on-chip ram)

Nios® V/II Embedded Design Suite (EDS)

Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++

Max 10 'Downloading ELF Process failed' (on-chip ram)

719 Views

Using Prime 16.1.2 Standard Edition, after programming a design with a Nios, both eclipse and via the command line, are unable to download the .elf software to the MAX10M50SAE144IX on-chip ram:

Processor is already paused

Initializing CPU cache (if present)

Downloading 53KB in 0.7s (75.7KB/s)

Verifying 00200000 (0%)

Verify failed between 0x20000 and 0x2CC87

Qsys is configured with an on-chip ram of 131072 bytes (0x20000-0x3ffff). Both the CPU and on-chip memory are clocked from an external 100Mhz.

In the Nios BSP settings, I have all code/data segments pointing to this on-chip ram, with the same addresses as generated by Qsys.

What could cause the on-chip ram to not verify?

The other anomaly, which not sure if it's related, but I've set a PLL output channel for 64khz, but instead it comes out as 20khz.. the external input clock (100Mhz) is good .

Link Copied

0 Replies

Community support is provided during standard business hours (Monday to Friday 7AM - 5PM PST). Other contact methods are available here.

Intel does not verify all solutions, including but not limited to any file transfers that may appear in this community. Accordingly, Intel disclaims all express and implied warranties, including without limitation, the implied warranties of merchantability, fitness for a particular purpose, and non-infringement, as well as any warranty arising from course of performance, course of dealing, or usage in trade.

For more complete information about compiler optimizations, see our Optimization Notice.