Nios® II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
Announcements
Intel Support hours are Monday-Fridays, 8am-5pm PST, except Holidays. Thanks to our community members who provide support during our down time or before we get to your questions. We appreciate you!

Need Forum Guidance? Click here
Search our FPGA Knowledge Articles here.
12453 Discussions

NAND U-Boot for Arria10 Soc Development Kit stucks

Altera_Forum
Honored Contributor II
931 Views

Hi Everybody, 

 

I'm using GSRD 16.1 and EDS 16.1 on Fedora 25 (64bit) OS. 

Using the procedure described at https://rocketboards.org/foswiki/documentation/a10gsrd161nandboot, I built a U_BOOT for NAND, while keeping the prebuilt binaries untouched but it doesn't come up. 

Replacing my U-BOOT with the prebuilt U-BOOT - and it works fine. 

 

On the other hand, 

Replacing the daughterboard with the microSD daughterboard: 

Building my U-BOOT for microSD and using the associated procedures in http://www.alterawiki.com/wiki/socedsgettingstarted, everything works smoothly. 

 

I'm attaching a log for the NAND buildup. 

Any clues?
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
145 Views

Hi, 

 

If the time permits, please use the tested and supported operating system for this example. Feroda is not a tested version. 

 

 

 

Regards, 

CloseCL 

(This message was posted on behalf of Intel Corporation)
Reply