Re: Not able to factory restore my board

Altera_Forum · ‎04-01-2014

Hello There,

I am not able to restore factory setting on my board , i am following the instruction given in nios dev. board ref. manual , i am not able to restore my board on factory setting.

the steps i am following.

1. Open the Nios ESDK Shell

2. Chnage the directory to c:/altera/quartus50/example/factory_recovery/nios_cyclone_1c20

3. type the command "./restore_my_flash"

please see that attached output of my shell.

and help me out how do i overcome from this issue

i have also attached my Environment Variable Setting also for your reference

kaushal

Altera_Forum · ‎04-01-2014

Quartus 5.0 ! It is a April 1st joke ;-) ?

Hi, it seems your Quartus installation has been corrupted.

You have Quartus 5.0 and Quartus 9.1SP2.

You "SOPC_BUILDER...." environment may be corrupted : the "+" is suspicious, the paths should be separated by a ";"

Try to redownload the Factory Flash through Nios II IDE.