Hi ,
Devboard: 3C120
OS: UClinux
Up: NIOS2
I have followed the instruction in this link "alterawikiDOTcom_wiki_DasUBoot" to implement UBOOT. I have run the defualt with no problem using (nios2-generic.h and custom_fpga.h)..
when I try to do this procedure for 3C120 according to this link "alterawikiDOTcom_wiki_
guide to 3c120 with u-boot"... I always get this error:
"altera_pio.c:77: error: 'LED_PIO_WIDTH' undeclared here (not in a function)" .
I have tried to diff the custom_fpga.h and 3c120_fpga.h and I see the different naming convetions on the PIO.. I have tried to comment them out but still gave me error..
See attchment please..
Hope someone could help me.. I have too far on this project prelims.. I have to get this uboot working because the product will be encapsulated and would be very much appreciated if we could programm the chip externall without opening the product..
