Nios® II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
Announcements
Intel Support hours are Monday-Fridays, 8am-5pm PST, except Holidays. Thanks to our community members who provide support during our down time or before we get to your questions. We appreciate you!

Need Forum Guidance? Click here
Search our FPGA Knowledge Articles here.

Ubuntu uClinux with DE0-Nano

Altera_Forum
Honored Contributor II
805 Views

Hi, 

 

 

I wants to run ubuntu uclinux on De0-nano board, for this i downloaded all the packages.But when i executed svn co command . 

 

 

output is also came but not exactly. 

 

output shoulb be like this , 

~/uClinux/distro 

~/uClinux/distro/nios2-linux-20090929.tar 

~/uClinux/distro/drivers 

~/uClinux/distro/drivers/lcd_16207.c 

~/uClinux/distro/drivers/lcd_16207.h 

~/uClinux/distro/patches 

~/uClinux/distro/patches/atse_h.patch 

~/uClinux/distro/patches/config_c.patch 

~/uClinux/distro/patches/isp1362-hcd_c.patch 

~/uClinux/hardware 

~/uClinux/hardware/DE0-Nano 

~/uClinux/hardware/DE0-Nano/simple.zip 

~/uClinux/hardware/DE2-70 

~/uClinux/hardware/DE2-70/simple.zip 

~/uClinux/hardware/DE4 

~/uClinux/hardware/DE4/simple.zip 

~/uClinux/precompiled 

~/uClinux/precompiled/DE0-Nano 

~/uClinux/precompiled/DE0-Nano/DE0_Nano.sof 

~/uClinux/precompiled/DE0-Nano/zImage 

~/uClinux/precompiled/DE2-70 

~/uClinux/precompiled/DE2-70/simple.sof 

~/uClinux/precompiled/DE2-70/zImage 

~/uClinux/precompiled/DE4 

~/uClinux/precompiled/DE4/ccmsys.sof 

~/uClinux/precompiled/DE4/zImage 

~/uClinux/tools 

~/uClinux/tools/nios2gcc-20080203.tar.bz2 

~/uClinux/README 

 

 

But for me like this  

A uClinux/tools 

A uClinux/tools/nios2gcc-20080203.tar.bz2 

A uClinux/precompiled 

A uClinux/precompiled/DE0-Nano 

A uClinux/precompiled/DE0-Nano/DE0_Nano.sof 

A uClinux/precompiled/DE0-Nano/zImage 

A uClinux/precompiled/DE4 

A uClinux/precompiled/DE4/ccmsys.sof 

A uClinux/precompiled/DE4/zImage 

A uClinux/precompiled/DE2-70 

A uClinux/precompiled/DE2-70/simple.sof 

A uClinux/precompiled/DE2-70/zImage 

A uClinux/distro 

A uClinux/distro/userapps 

A uClinux/distro/userapps/blink.c 

A uClinux/distro/userapps/setleds.c 

A uClinux/distro/userapps/readswitches.c 

A uClinux/distro/userapps/watchbuttons.c 

A uClinux/distro/userapps/setsevenseg.c 

A uClinux/distro/userapps/Makefile 

A uClinux/distro/userapps/ccmsys_pio.h 

A uClinux/distro/patches 

A uClinux/distro/patches/atse_h.patch 

A uClinux/distro/patches/isp1362-hcd_c.patch 

A uClinux/distro/patches/config_c.patch 

A uClinux/distro/patches/nfsroot_c.patch 

 

 

Where is the mistake?,plz help me. 

 

 

 

 

Thanks, 

Alex.
0 Kudos
0 Replies
Reply