how to write a costum gpio interrupt driver

[Altera_Forum]

I want to write a custom gpio interrupt driver. I just want to trigger the led in interrup handle function. 

In my probe function I register interrupt and initial the registers. I can see the interrupt number in /proc/interrupt after booting.  Like below 197: 0 0 GIC gpio_key but the interrupt handle function nerver execute. What is the problem with the driver？

[Altera_Forum]

Hi, 

 Try this. http://lists.rocketboards.org/pipermail/rfi/2013-july/000295.html  Regards,  ZS.V.

[Altera_Forum]

Thanks in advance. 

I'm having trouble compiling my custom device driver. I'm using the 14.1 tools.   My compiled linux is in /home/user1/linux-socfpga  My cross compiler is in /home/user1/gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux/bin/arm-linux-gnueabihf-  My device driver is in /home/user1/newDriver  I'VE TRIED LOTS OF THINGS - and googled for a few hours   One was -- from the newDriver directory I tried: # ] make ARCH=arm CROSS_COMPILE=/home/user1/gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux/bin/arm-linux-gnueabihf- KERNEL_SRC=/home/user1/linux-socfpga  IT TRIES BUT CAN'T FIND the kernel header files.  Any help would be greatly appreicated.

[Altera_Forum]

--- Quote Start ---  Thanks in advance. I'm having trouble compiling my custom device driver. I'm using the 14.1 tools.   My compiled linux is in /home/user1/linux-socfpga  My cross compiler is in /home/user1/gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux/bin/arm-linux-gnueabihf-  My device driver is in /home/user1/newDriver  I'VE TRIED LOTS OF THINGS - and googled for a few hours   One was -- from the newDriver directory I tried:# ] make ARCH=arm CROSS_COMPILE=/home/user1/gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux/bin/arm-linux-gnueabihf- KERNEL_SRC=/home/user1/linux-socfpga  IT TRIES BUT CAN'T FIND the kernel header files.  Any help would be greatly appreicated.  --- Quote End ---    SOLUTION: Here is the Makefile   KERNEL_DIR=/home/user1/linux-socfpga obj-m := testDriver.o PWD := $(shell pwd) default:  $(MAKE) M=$(PWD) ARCH=arm CROSS_COMPILE=/home/user1/gcc-linaro-arm-linux-gnueabihf-4.8-2013.12_linux/bin/arm-linux-gnueabihf- -C $(KERNEL_DIR) SUBDIRS=$(PWD) modules clean:  $(MAKE) -C $(KERNEL_DIR) SUBDIRS=$(PWD) clean

[Altera_Forum]

Hey jpe1313, 

 Can you please specify what is the content of your linux-socfpga? Is this :  http://git.rocketboards.org/linux-socfpga.git

[Altera_Forum]

Yes, it is. There are instructions on how to get your Linux release and tools. 

 http://www.rocketboards.org/foswiki/documentation/gsrd141compilinglinux  and if you want to checkout a different kernel follow these instructions -->  http://rocketboards.org/foswiki/documentation/alterasocltsirtkernel   Hope that helps.