Nios® II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
Intel Support hours are Monday-Fridays, 8am-5pm PST, except Holidays. Thanks to our community members who provide support during our down time or before we get to your questions. We appreciate you!

Need Forum Guidance? Click here
Search our FPGA Knowledge Articles here.
12409 Discussions

problem with nios2 cypress sram controller

Honored Contributor II

I'm using a cyclone 3 and a cypress Sram cy7c1380d. 

This sram has a 512kB * 36 dimension, but in the sopc builder, the sram controller dosen't support this dimension(only 1M*18, 2M and 4M are supported).  


i tried to use the 1M*18 controller, it requires 20 pins assignment for the address, but my own sram has only 19 pins for address. And the failure of a helloworld test with nios ide turns out that a controller of 512kB*36 dimension (which has only 19 pins for address) is necessary. 


Have you guys ever met this problem? 

can anyone help me with this? it drives me crazy!! :( 


ps: using quartus 10.0 and sopc builder 10.0
0 Kudos
0 Replies