- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Permalink
- Report Inappropriate Content
Hello everybody, i'm trying to make some simple project on DE1-SoC and have problems with H2F bridge. I have a GHRD as a base and i try to read from Onchip RAM to HPS RAM. Problem is that i don't really sure that i work with OCRAM. I can write and read from 0xc0000000+, but when i initialize OCRAM with .hex file in QSYS and then read this data from bare-metal app, i read nulls. Looks like i read from other undefined place.
I initialize bridges like that it was in my university labs: if (status == ALT_E_SUCCESS) {
status = socfpga_bridge_setup(ALT_BRIDGE_LWH2F);
}
if (status == ALT_E_SUCCESS)
{
status = socfpga_bridge_setup(ALT_BRIDGE_H2F);
}
ALT_STATUS_CODE socfpga_bridge_setup(ALT_BRIDGE_t bridge){
printf("INFO: Setup Bridge ...\n", (int)bridge);
ALT_STATUS_CODE status = ALT_E_SUCCESS;
if (status == ALT_E_SUCCESS)
{
// STEP 12:
status = alt_bridge_init(bridge, NULL, NULL);// Attempt to initialize the bridges
}
if (status == ALT_E_SUCCESS)
{
status = alt_addr_space_remap(ALT_ADDR_SPACE_MPU_ZERO_AT_BOOTROM,
ALT_ADDR_SPACE_NONMPU_ZERO_AT_OCRAM,
ALT_ADDR_SPACE_H2F_ACCESSIBLE,
ALT_ADDR_SPACE_LWH2F_ACCESSIBLE);
}
if (status == ALT_E_SUCCESS)
{
printf("INFO: Setup of Bridge successful.\n\n", (int)bridge);
}
else
{
printf("ERROR: Setup of Bridge return non-SUCCESS %d.\n\n", (int)bridge, (int)status);
}
return status;
}
I dont know should it work with initialized in qsys ocram, or if i dont want to fill ocram myself, i need to something else? I read try to read like that: for (uint32_t i = 0; i < 128; ++i) {
printf("FPGA_RAM= \n",(unsigned int)alt_read_word(ALT_H2F_BASE+ALT_H2F_RAM_OFFSET+offset));
temp++;
offset=offset+4;
}
where ALT_H2F_BASE=0xc0000000, and ALT_H2F_RAM_OFFSET=0x00000000. And the second question for my future plan is how to make dma transfer fron fpga ram ro hps ocram? is there enough alt_dma_memory_to_memory() or i should do this another way? I've never worked with SoC and it difficult for me to understand some things and Altera manuals. P.S.: sorry for mistakes i'm bad in english, but i hope you understand and will help me. Thanks:rolleyes:
Link Copied
0 Replies

Reply
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page