Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12628 Discussions

Help to install uClinux on Cyclone 3

Altera_Forum
Honored Contributor II
956 Views

Please help me, i have some problems compling the nios2 toolchainI want to install uClinux (2.6.9) on Cyclone 3 EP3C25F324C8, following the tutorial "http://scorpius.homelinux.org/~marc/nios2.html". When i arrive at the command "make ARCH=nios2nommu CROSS_COMPILE=nios2-linux-uclibc- hwselect SYSPTF=/home/nastri/nios/sopc.ptf" for the kernel configuration, there would be a list of hardware resources of my Nios system, but the list is empty (under "Please select a device to upload the kernel to:"). In the following it can be observed the problem in the Linux (Debian) shell.

0 Kudos
2 Replies
Altera_Forum
Honored Contributor II
268 Views

Message unreadable

0 Kudos
Altera_Forum
Honored Contributor II
268 Views

Pratically: 

nastri@debian:~$ su 

Password: 

root@debian:/home/nastri# export PATH=$PATH:/opt/nios2/bin 

root@debian:/home/nastri# cd linux-2.6.9 

root@debian:/home/nastri/linux-2.6.9# make ARCH=nios2nommu CROSS_COMPILE=nios2-linux-uclibc- hwselect SYSPTF=/home/nastri/nios/sopc.ptf 

no emulation specific options. 

RUNNING hwselect 

--- Please select which CPU you wish to build the kernel against: 

(1) cpu - Class: altera_nios2 Type: s Version: 7.08120 

Selection: 1 

--- Please select a device to upload the kernel to: 

Selection: (but there aren't options to choose)" 

Regards
0 Kudos
Reply