Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12612 Discussions

Port U-boot 2013 to 2017 version

Altera_Forum
Honored Contributor II
1,114 Views

Hello, i am traying to port this configuration to u-boot 2017: https://rocketboards.org/foswiki/view/documentation/niosiilinuxusermanualforstratixiv1 (https://rocketboards.org/foswiki/view/documentation/niosiilinuxusermanualforstratixiv

This manual use 2013 version for U-boot, and it's works fine, but when i try to use the 2017 version doesn't work. I am trying to load u-boot on ram. This error appears in console ( jtag uart) when i load it: 

"initcall sequence d8000e1c failed at call d7fc053c (err=-19)# ## ERROR# ## Please RESET the board# ##" 

I think, maybe, the error is on device tree source. 

Can anyone help me?.... Thanks 

Pd: The board is an 4sgx530  

Sory for my bad english
0 Kudos
0 Replies
Reply