Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12620 Discussions

Video Out/VGA Display Skipping Every Other X Pixel

Altera_Forum
Honored Contributor II
1,029 Views

Hey, so I'm using a De1-SoC and programming in Assembly using the the Nios II instruction set found here: https://www.altera.com/content/dam/altera-www/global/en_us/pdfs/literature/hb/nios2/n2cpu_nii51017.pdf 

So I was just experimenting with the video out pixel buffer (at memory located 0x8000000) and tried to create a screen that was just entirely white. I looped through each pixel and coloured each one white but I am getting vertical lines that are not being coloured in. I have provided pictures as well as screenshots of the documentation I used to create the image, my source code, and the output on my VGA monitor. 

 

http://www.alteraforum.com/forum/attachment.php?attachmentid=11935&stc=1 Vertical columns not being printed white 

http://www.alteraforum.com/forum/attachment.php?attachmentid=11937&stc=1 Video Out Documentation - 1 

http://www.alteraforum.com/forum/attachment.php?attachmentid=11938&stc=1 Video Out Documentation - 2 

http://www.alteraforum.com/forum/attachment.php?attachmentid=11936&stc=1 Video Out Documentation - 3 

 

Any help is greatly appreciated! Cheers
0 Kudos
0 Replies
Reply