Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12618 Discussions

cant work ethernet on uClinux 2.6.x

Altera_Forum
Honored Contributor II
997 Views

Sorry, for my bad english. I have nios2 evaluation board with cyclone 1c12 with PHY ethernet module, and i use "nios2-linux-20090929". without "Ethernet (10 or 100Mbit) -> Opencores (Igor) Emac suppor" compilation is successful, but if i check it I has many error :  

 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c: In function `oeth_open': 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c:1575: error: `na_igor_mac_irq' undeclared (first use in this function) 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c:1575: error: (Each undeclared identifier is reported only once 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c:1575: error: for each function it appears in.) 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c: In function `oeth_close': 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c:1657: error: `na_igor_mac_irq' undeclared (first use in this function) 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c: In function `oeth_probe': 

/home/vlad/uClinux/distro/nios2-linux/linux-2.6/drivers/net/open_eth.c:2188: error: `na_igor_mac' undeclared (first use in this function) 

 

Thanks.
0 Kudos
1 Reply
Altera_Forum
Honored Contributor II
263 Views

maybe this problem with not correct configuration in SOPC builder?

0 Kudos
Reply