Nios® V/II Embedded Design Suite (EDS)
Support for Embedded Development Tools, Processors (SoCs and Nios® V/II processor), Embedded Development Suites (EDSs), Boot and Configuration, Operating Systems, C and C++
12603 Discussions

write master intermittent issues

Altera_Forum
Honored Contributor II
965 Views

I have an SOPC system and a write master. I use the write master to write in a 128 bit word into onchip memory every 1 second (the same address). Some of the time, it works fine but when I make a very small change (i.e., so the 128 bit word changes) the jtag uart output from nios stops outputting, so I just get a blank console screen where it should be periodically outputting the memory contents. It's strange because for some 128 bit words it works fine and for others, it doesn't and i'm having troublee identifiying the problem.

0 Kudos
3 Replies
Altera_Forum
Honored Contributor II
295 Views

You're doing IORD()?

0 Kudos
Altera_Forum
Honored Contributor II
295 Views

 

--- Quote Start ---  

i'm having troublee identifiying the problem. 

--- Quote End ---  

 

 

1) Use SignalTap to probe the Avalon bus when you have the problem. 

 

2) Simulate the system using Modelsim and recreate the stimulus that is causing the hardware problem. 

 

3) Debug, and repeat from (1). 

 

Cheers, 

Dave
0 Kudos
Altera_Forum
Honored Contributor II
295 Views

Ok, will try that. My code is  

while(1) 

printf("Data in MEM1\n"); 

for(j = 0; j < 4; j++){ 

printf("%X\n",IORD(ONCHIP_MEMORY2_0_BASE, j)); 

alt_busy_sleep(1000000); 

}
0 Kudos
Reply