Processors
Intel® Processors, Tools, and Utilities
14403 Discussions

GPIO programming - Sofia-3GR (Atom X3 - C3200)

SKand6
Beginner
1,399 Views

Hello Everyone,

We are using HE 922(Atom X3-C3200) module with Yocto BSP MR4.1 and finding issues configuring EINT capable interrupt pins for GPIO functionality. Required gpio, direction and output settings are configured in the BSP device tree /arch/x86/boot/dts, but unable to see it reflecting in the Linux OS.

Also tried configuring gpio using /sys/class/gpio/export mechanism, and is showing error "Can't bind gpio to interrupt". We have this issue on GPIO72, but can be reproduced for any EINT capable pins.

Appreciate your valuable help & suggestion to resolve this issue.

Regards,

Sajith

0 Kudos
1 Reply
idata
Employee
478 Views

Hi Rur,

 

 

I understand you are using an Intel Atom® x3-C3200RK Processor and you have problems configuring EINT interrupt pins for GPIO functionality.

 

 

I can help address you to the appropriate support team. For this type of issues Intel offers the following contact information:

 

 

If you are an Intel partner, please contact your Intel representative to get in touch with a Field Application Engineer

 

 

If you need manuals, documentation and more information about this matter, please check this link https://www.intel.com/content/www/us/en/design/resource-design-center.html https://www.intel.com/content/www/us/en/design/resource-design-center.html, you may need to register to get assistance.

 

 

The Intel Developer Zone will assist you with hardware and software https://software.intel.com/en-us https://software.intel.com/en-us

 

 

Additionally, since this is hardware and software problem, you can try contacting or embedded design team at https://embedded.communities.intel.com/community/en/ https://embedded.communities.intel.com/community/en/

 

 

Regards,

 

Allan J.
0 Kudos
Reply