Re: PCIe shows as x0

MQuin11 · ‎06-09-2017

I have an i3 6100 in a Biostar TB250-BTC motherboard. CPU-Z reports my PCIe speed as x0. I'm using a known-good GPU. I've also tried a second of the same main boards, and a G3900 proc I had on had. Can anyone think of a reason why these boards don't seem to recognize any PCIe lanes?

n_scott_pearson · ‎06-09-2017

Have you checked to see if there are any firmware (BIOS) updates available for this board. If so, install them and then test again...

Hope this helps,

...S

MQuin11 · ‎06-10-2017

I've tried all 3 BIOS available from the manufacturer

n_scott_pearson · ‎06-10-2017

Well, this could simply be a bug in the CPU-Z program, but I rather doubt it. You need to contact Biostar's customer support and have them report this issue to their BIOS engineers.

...S

idata · ‎06-19-2017

Hello FourLeaf,

I was reviewing this thread and I wanted to know if you resolved the issue or if you contacted Biostar?

Regards,

Juan V.

MQuin11 · ‎06-19-2017

I have contacted Biostar but they don't have a solution. I'm going to return both motherboards. It is odd that this same issue is on two boards both tried with 2 different processors.